Best Practices for Maintenance of FRF in Turbine EHC System.



What is a Turbine EH System ? 

Electro-Hydraulic Control System (EHC System) of a Turbine is the most critical equipment of a Power Plant. It’s the heart of a turbine which controls Steam flow into the turbine. A malfunctioning EHC System can lead to Turbine stoppage and thereafter create a dominoes effect on the synchronized processes of the power plant. Breakdown-free and reliable operation of the EHC System is the biggest challenge of an Operation & Maintenance Manager. To learn more follow https://www.linkedin.com/company/minimacsystemsprivatetlimited

Due to High Steam Pressure & Temperature in the vicinity of a Steam Turbine, as safety compliance, it is a mandate to use Fire Resistant Fluids (FRF) for Hydraulic control of the EHC System. A specially designed synthetic fluid called Tri-Xylenyl Phosphate Ester demonstrates best Fire Resistant properties for the application.

Phosphate esters are polar fluids with excellent lubricating properties that can operate under extreme conditions. 
However, phosphate esters require strict control in order to extend their useful lifespan.

 Water and Acids de-grade FRF

Phosphate Esters (which are being used as FRF in EHC Systems) are manufactured under controlled environment through the esterification of Phosphoric Acid, where water is a by-product.

Phosphoric Acid + Alcohol → Phosphate Ester + Water

Unfortunately, Phosphate Esters are highly hygroscopic (tendency to absorb water) in nature and the esterification process is reversible when Phosphate Esters come in contact with water. This is referred to as hydrolysis. The higher the water content and temperature, the faster the ester will break down by hydrolysis.

Phosphate Ester + Water → Phosphoric Acid or Acid Phosphates + Alcohol 

Thereby it is recommended to control the water level, temperature, and acidity in FRF of the EHC Systems. If uncontrolled, the acidity accelerates rapidly. 

TAN Value or Total Acid Number (measured in unit mgKOH/gm) is a parameter to denote acid content accumulation in FRF. A high TAN Value degrades the fluid rapidly, decreases its viscosity and resistivity. Thereby causing acid corrosion of sensitive servo-valves and other system components of an EH System.

 FRF de-gradation due to Particles

 Water and acid are not the only contaminants which can degrade the FRF.

Since the dynamic oil film and fine clearances in servo-valves are less than 5 microns, even the finest silt particles and sludge/varnish deposits from fluid degradation can hinder proper operation. Fine particles get trapped in clearances between the valve plunger and housing. This abrasive wear is known as seizing or grinding. This can result in wear rates that are a thousand times greater than anticipated by the valve manufacturer.  
Therefore, it only makes sense to use very fine filtration (3-5 micron) for maintaining the EHC fluid. For any Technical Consultancy Call - +91 89751 50700

 Consequences of FRF de-gradation 
  1. Acid, gel and sludge/varnish formation  
  2. Valve sticking or blocking
  3. Reduced lubricity and film strength 
  4. Corrosion, erosion and abrasion wear 
  5. Reduced fluid resistivity
  6. Soot generation (entrained air) 
  7. Short fluid life  

The result is poor EHC system reliability and reduced turbine availability.

Condition Based Monitoring of FRF

It is highly recommended to carry out regular Fluid Analysis of FRF and identify any abnormalities in the trend for further preventive actions. Recommended Parameter Values for FRF:

     Parameter Unit Value
     Appearance ASTM Color Code Clear, <3
     Water content ppm 500
     Kinematic Viscosity(@40 0C) cSt 41-45
     Acidity (TAN) mgKOH/gm < 0.15
     Particle contamination code ISO 4406 15/12
     Cleanliness code (NAS-1638) NAS 1638 5


The Minimac® FRF Re-conditioning System comprises 4 Major Steps, all packaged carefully in 1 single skid.
  • Solid contamination Super-fine Filtration
  • Moisture in oil separation by Vacuum Dehydration technology
  • TAN reduction by Ion Exchange technique
  • EHC System Tank Moisture Removal by Inert Gas Blanketing technique


Would love to have your feedback, experience, query.. Got any question? Ask away!!

Comments

Post a Comment

Popular posts from this blog

Control System Of Turbine - Failure & Maintenance

Image
Control System The turbine control system describes the control over the opening of control valves corresponding to demand signals, and steam flows into the turbine with the help of a governing system that facilitates the operation of the turbo set in an interconnected grid system. Governing system is responsible for various function such as speed & load control functions, the start-up/shut-down controls, the over-speed control, turbine stress calculation, to control the initial run-up and synchronization of the Unit, to assists in matching the power generated to that demanded by responding to system frequency changes, to regulate the steam control valves position (and hence the load generated)in response to signal from the operator or from the load dispatch Centre, to restrict the speed rise within acceptable limits should the unit get disconnected (islanding) from the lgridoad and some protective trip functions. With continuous research and developments in modern turbine technolo
Read more

Minimac Technology

Image
 The secret recipe of the growth story at Minimac Syste ms has been its capability to drive technological advancement in the field of contamination control for lubrication reliability. Research and development on technology and products have always been the key reason to keep the Minimac products a step ahead of its competitors in the market. Technological development has been one of the core competencies which Minimac possesses, thereby ensuring a definite competitive advantage. Contaminations in lubricants are of various types and characteristics depending on the lubricant, equipment application, ambient conditions, age of equipment, etc. In order to control, separate or eliminate the contamination, there are multiple techniques. Each technique has pros and cons and hence there is no single technology that can be considered universally better than others. ​ Minimac Systems over the years has become equipped with almost all the technologies which are required for contaminat
Read more

Storage Management of Oil Products and its Importance.

Image
Product storage is an important criterion for any segment of products. It plays a vital role in the longevity of the products, every product in any form has a certain life period and this life period forms the baseline of the product. Coming to the lubricating oil industry, product life period plays an important role in the smooth running of the machinery and the plant. As these oils play a very important role in the day to day functioning of critical machinery, so if not maintained properly these can lead to the breakdown of machinery thereby leading to a shutdown of the plant which leads to the incurrence of huge loss. Therefore it is very important that these oils should be used well in advance before their life period expires. We can hereby pen down certain prerequisite conditions for storage of lubricants: 1.  Pre usage Inspection : It is mandatory to verify their performance properties & conditions with oil analysis for the oils that have been kept for a long pe
Read more