Lubrication Reliability and Contamination Control

 Lubrication is like the blood for equipment which plays a vital role in the smooth running of equipment or machinery. Taking care of lubrication is the most important maintenance activity among all maintenance activities.


Although, there may be some challenges that lubricants face that may lead to issues of oil contamination and premature machine failure.


Let's discuss it in detail.


CHALLENGES OF LUBRICANT!!


Some of the basic challenges that lubricants face are described below.


Lubricants face many challenges in providing lubrication to mechanical equipment, depending on the environment they operate in.



Temperature fluctuation, Heat, Heavy Load, Entrained Air, etc are some of the Challenges faced by Lubricants. These challenges invite different types of contamination which reduce the life of the equipment and hinder the smooth flow of operation.


Dealing with these challenges is not easy and demands regular check of oil and equipment lubricants need periodic purification to eliminate contaminants


You must have faced these challenges while dealing with lubricants. Are you looking to adopt the methods to purify the lubricants? Then you must connect to Minimac Systems Private Limited.



One of the steel plants in India was facing the frequent clogging of inline lube oil filters which was disturbing the machine operation. Click here and read in detail how we helped avoid the production loss. 


The different types of Hydraulic equipment used in Steel Plants face an untimely breakdown and hindrance in operation due to OIL contamination and clogged systems.




Lubrication Reliability is an important part of O&M in Steel Plants. To increase hydraulic equipment's health, Superfine Oil is mandatory.


Minimac's range of Oil Purification Systems ensures fine filtration of oil up to 0.1 micron. We take care of your equipment and eliminate the source of contamination after thorough Oil Analysis and Condition Monitoring.


Have your Maintenance costs increased due to Mechanical Breakdowns? If yes then contact us and we will help you out.


Register now for our upcoming webinar on "Ask the Experts - Lubrication Reliability & Contamination Control" where you can have a live Questions & Answer session with our speakers.

Comments

Post a Comment

Popular posts from this blog

Control System Of Turbine - Failure & Maintenance

Image
Control System The turbine control system describes the control over the opening of control valves corresponding to demand signals, and steam flows into the turbine with the help of a governing system that facilitates the operation of the turbo set in an interconnected grid system. Governing system is responsible for various function such as speed & load control functions, the start-up/shut-down controls, the over-speed control, turbine stress calculation, to control the initial run-up and synchronization of the Unit, to assists in matching the power generated to that demanded by responding to system frequency changes, to regulate the steam control valves position (and hence the load generated)in response to signal from the operator or from the load dispatch Centre, to restrict the speed rise within acceptable limits should the unit get disconnected (islanding) from the lgridoad and some protective trip functions. With continuous research and developments in modern turbine technolo
Read more

Reconditioning of EH Oil

Image
A 1200 MW coal-fired thermal power plant using Into-Chinese Turbine EHC System in Southern India. The Plant was struggling with the rapid increase in TAN values in the EH oil of the governing system of the turbine. Also, the moisture content was more than permissible limits. Degradation of the oil was due to contamination ingression into the system resulting in by-product formation. Minimac’s EH oil reconditioning system “ MLC LVDH TRIX 20 ” proved to be the savior and an unexpected shutdown of the turbine worth ₹1.05 Cr per day was saved . PROBLEMS A rapid increase in the Total Acid Number (TAN) could degrade the EH oil and lead to the possibilities of failure of servo valve, hunting, power generation loss, unplanned shutdown, etc. Oil Analysis was done to check the properties of EH oil like Moisture, NAS value, Total Acid Number. SOLUTIONS Installation of Minimac’s EH Oil Reconditioning System “ MLC LVDH TRIX 20 ” is comprehensively designed with 4 major technologies to: Remove solid
Read more

Minimac Technology

Image
 The secret recipe of the growth story at Minimac Syste ms has been its capability to drive technological advancement in the field of contamination control for lubrication reliability. Research and development on technology and products have always been the key reason to keep the Minimac products a step ahead of its competitors in the market. Technological development has been one of the core competencies which Minimac possesses, thereby ensuring a definite competitive advantage. Contaminations in lubricants are of various types and characteristics depending on the lubricant, equipment application, ambient conditions, age of equipment, etc. In order to control, separate or eliminate the contamination, there are multiple techniques. Each technique has pros and cons and hence there is no single technology that can be considered universally better than others. ​ Minimac Systems over the years has become equipped with almost all the technologies which are required for contaminat
Read more