Reconditioning of EH Oil

A 1200 MW coal-fired thermal power plant using Into-Chinese Turbine EHC System in Southern India.


The Plant was struggling with the rapid increase in TAN values in the EH oil of the governing system of the turbine. Also, the moisture content was more than permissible limits. Degradation of the oil was due to contamination ingression into the system resulting in by-product formation.

Minimac’s EH oil reconditioning system “MLC LVDH TRIX 20” proved to be the savior and an unexpected shutdown of the turbine worth ₹1.05 Cr per day was saved.


PROBLEMS

  • A rapid increase in the Total Acid Number (TAN) could degrade the EH oil and lead to the possibilities of failure of servo valve, hunting, power generation loss, unplanned shutdown, etc.
  • Oil Analysis was done to check the properties of EH oil like Moisture, NAS value, Total Acid Number.


SOLUTIONS

Installation of Minimac’s EH Oil Reconditioning System “MLC LVDH TRIX 20” is comprehensively designed with 4 major technologies to:

  • Remove solid contamination from oil by Superfine Filtration Technology.
  • Remove moisture from oil by Vacuum Dehydration Technology.
  • Reduce Total Acid Number (TAN) by Ion Exchange Technique.
  • EHC system tank moisture removal and ingress prevention by Inert Gas Blanketing Technique.
Along with equipment installation, our Service Engineer trained the customer’s team on the functions of the EH Oil Re-Conditioner, FRF Maintenance, Contamination Control, and the Importance of the Oil Analysis Program.



Total Consumable Details:

  • Filter - 01 qty of 10 - microns
  • Filter - 01 qty of 3 - microns to achieve NAS 5 cleanliness
  • Total Resin - 60 liters.


BENEFITS:

1) Extended oil life

2) Elimination of oil replacement cost

3) Protection of turbine against hunting

4) Increased turbine reliability.



The above graph shows the trend analysis of tracked values during the reconditioning of EH Oil at Unit #2:


Comments

Post a Comment

Popular posts from this blog

Control System Of Turbine - Failure & Maintenance

Image
Control System The turbine control system describes the control over the opening of control valves corresponding to demand signals, and steam flows into the turbine with the help of a governing system that facilitates the operation of the turbo set in an interconnected grid system. Governing system is responsible for various function such as speed & load control functions, the start-up/shut-down controls, the over-speed control, turbine stress calculation, to control the initial run-up and synchronization of the Unit, to assists in matching the power generated to that demanded by responding to system frequency changes, to regulate the steam control valves position (and hence the load generated)in response to signal from the operator or from the load dispatch Centre, to restrict the speed rise within acceptable limits should the unit get disconnected (islanding) from the lgridoad and some protective trip functions. With continuous research and developments in modern turbine technolo
Read more

Minimac Technology

Image
 The secret recipe of the growth story at Minimac Syste ms has been its capability to drive technological advancement in the field of contamination control for lubrication reliability. Research and development on technology and products have always been the key reason to keep the Minimac products a step ahead of its competitors in the market. Technological development has been one of the core competencies which Minimac possesses, thereby ensuring a definite competitive advantage. Contaminations in lubricants are of various types and characteristics depending on the lubricant, equipment application, ambient conditions, age of equipment, etc. In order to control, separate or eliminate the contamination, there are multiple techniques. Each technique has pros and cons and hence there is no single technology that can be considered universally better than others. ​ Minimac Systems over the years has become equipped with almost all the technologies which are required for contaminat
Read more

Storage Management of Oil Products and its Importance.

Image
Product storage is an important criterion for any segment of products. It plays a vital role in the longevity of the products, every product in any form has a certain life period and this life period forms the baseline of the product. Coming to the lubricating oil industry, product life period plays an important role in the smooth running of the machinery and the plant. As these oils play a very important role in the day to day functioning of critical machinery, so if not maintained properly these can lead to the breakdown of machinery thereby leading to a shutdown of the plant which leads to the incurrence of huge loss. Therefore it is very important that these oils should be used well in advance before their life period expires. We can hereby pen down certain prerequisite conditions for storage of lubricants: 1.  Pre usage Inspection : It is mandatory to verify their performance properties & conditions with oil analysis for the oils that have been kept for a long pe
Read more